Shopping cart
×

Epoxy Resin Glue, 2-part epoxy resin and hardener, Permanent Glue for rhinestones, cabochons, general crafts, ADH0028

$35.00

  : Unavailable

Super strong permanent epoxy for gluing crystal rhinestones.

50g of Part A Epoxy Resin
50g of Part B Hardener

This set is a very flexible and extremely strong 2-component Epoxy Resin adhesive, which has been especially developed for gluing Swarovski crystals.

It has optimal adhesive characteristics for gluing with metal, glass, crystal, glue-able synthetic surfaces, rubber, wood, cork and porcelain. In addition, the mirrored surface of the crystal is protected against mechanical stress by the gentle build-up of adhesion, the optimized load transmission and the maximum elasticity.


**Application
The surfaces to be glued must be clean, dry and free from oil or grease.

Application time:  about 60 min.
Handling time:  about 3 hours (you can handle your product sooner with heat application, up to 212°F)
Complete hardening time:  about 24 hours (faster with heat)


**Easy to use
Squeeze just how much you need in a 1:1 ratio. Mix thoroughly (on a paper plate, or in a small cup) and add to a gluing syringe or spread on with a wood craft stick. Add your rhinestones to the glue, easy peasy!  Application time at room temp. is about 60 minutes.


We use this for rhinestones (those suckers aren't falling off!), metal findings, wood, so much more!
Bling up your car, license plate frame, hub caps, gear shift!


**Sole responsibility for any application, product use and the technical process lies with the customer.
**Not recommended for use by children.
**Use in a well-ventilated area.
**Gloves are recommended to avoid epoxy contact with skin.
**Follow all safety precautions included with the packaging.

Package comes with instructions for use.

Super strong permanent epoxy for gluing crystal rhinestones.

50g of Part A Epoxy Resin
50g of Part B Hardener

This set is a very flexible and extremely strong 2-component Epoxy Resin adhesive, which has been especially developed for gluing Swarovski crystals.

It has optimal adhesive characteristics for gluing with metal, glass, crystal, glue-able synthetic surfaces, rubber, wood, cork and porcelain. In addition, the mirrored surface of the crystal is protected against mechanical stress by the gentle build-up of adhesion, the optimized load transmission and the maximum elasticity.


**Application
The surfaces to be glued must be clean, dry and free from oil or grease.

Application time:  about 60 min.
Handling time:  about 3 hours (you can handle your product sooner with heat application, up to 212°F)
Complete hardening time:  about 24 hours (faster with heat)


**Easy to use
Squeeze just how much you need in a 1:1 ratio. Mix thoroughly (on a paper plate, or in a small cup) and add to a gluing syringe or spread on with a wood craft stick. Add your rhinestones to the glue, easy peasy!  Application time at room temp. is about 60 minutes.


We use this for rhinestones (those suckers aren't falling off!), metal findings, wood, so much more!
Bling up your car, license plate frame, hub caps, gear shift!


**Sole responsibility for any application, product use and the technical process lies with the customer.
**Not recommended for use by children.
**Use in a well-ventilated area.
**Gloves are recommended to avoid epoxy contact with skin.
**Follow all safety precautions included with the packaging.

Package comes with instructions for use.